Join our mailing list!






You are here: Home > Airplane Kits
FILTER YOUR RESULTS
1/3 Scale 1/4 Scale
1/6 Scale Civilian Planes
Detail Kits Dummy Engine Kits
Electric Conversion Kits Guns/Weapons
Military Planes Non Scale Vintage Planes
Other Scale Models Sport Planes
Wing Kits WW1 Planes
Sort By:
Page of 4
1/3 Scale Sopwith Pup Complete Landing Gear Kit
Our Price: $109.95

This is kit can be used as a Direct replacement for the New
Re-Engineered Pup, or the older discontinued Pup.  The kit comes with
everything needed to have functional bungee landing gear.  This will
assist in making your landing as smooth as possible, even on rough
runways!
Smoothie XL
Our Price: $296.69

The Smoothie XL is the one of the best
sport aerobatic planes on the market.  With its 88-3/4" fully symmetrical
wing, oversized control surfaces, and sleek aerodynamic shape, the
Smoothie XL out performs all the other 30cc sport kits available on the
market.  Install a 20cc gas engine if you want a tame relaxing plane
that will do loops, rolls and touch-and-goes all Sunday long.  Install a
35cc if you want to Unleash The Beast stored within the Smoothie XL.  
The optional flaps allow the Smoothie XL to almost stop in the air.
1/4 Scale 3 Point "WWI Floats"
Our Price: $142.95

The Balsa USA 3-Point "WWI Floats" are built utilizing Balsa, Basswood, and Plywood. Pre drilled metal mounting tangs are supplied along with a complete hardware package. Pre shaped basswood struts reduce building and sanding time to maximize your enjoyment while building your floats. 1/32 plywood bottoms on the main floats aid in the prevention of accidental damage from a run in with rocks or the shoreline.

The kit is completely laser cut enabling the use of the lightest materials possible, yet still allowing maximum durability. All laser cut parts are etched with the proper name for easy identafacation! Out of all the similar style floats available on the market, Balsa USA's "WWI Floats" are the easiest to build and assemble the quickest. This allows you to get the advantage over the enemy by being the first in the air!

With the floats properly installed, they will comfortably support a 22 pound airplane. This allows you to install them on most 1/4 scale WWI planes!
1/4 Scale Junkers D-1
Our Price: $428.95

Developed by Hugo Junkers, the D-1 was the world’s first operational all metal fighter plane. With a top speed of 140 mph and a service ceiling of just under 20,000 feet the D-1 was decades ahead of its wood and wire, fabric covered competition. This made it arguably the Messerschmitt ME-262 of World War One! Though it arrived too late to play a significant part, the Junkers D-1 was certainly a harbinger of what “Warbirds” were to become!
1/4 Scale Round Cowl Electric Conversion Kit
Our Price: $32.48

This will fit any Balsa USA 1/4 Scale WWI Kit with a round cowl. It is designed to be cut down to fit larger Motors or Smaller Batteries. With laser cut parts, assembly is quick and mounting it to the plane has never been easier. It will attach to the stock firewall of your plane.


Specifications

Engine Box Firewall - 2-5/8" x 2-5/8"
Engine Box Depth - Max 4"
Battery Box Inside - Max 2-1/2" x 1-3/4"
Overall Width - 7"
Overall Height - 5-3/4"
1/2 Scale Lewis Gun Kit
Our Price: $86.57











Balsa USA stepped up to the plate for the extreme giant scale WWI modeler with the release of their 1/2 scale machine guns.  Utilizing balsa, plywood, aluminum, fabric and other materials to get the perfect scale look, these guns will make your 1/2 scale WWI model that much easier to build.  Designed to be built in very little time, you can get an extra one built for that one off accessory for your desk at work!



1/2 Scale Vickers Gun Kit
Our Price: $86.57











Balsa USA stepped up to the plate for the extreme giant scale WWI modeler with the release of their 1/2 scale machine guns.  Utilizing balsa, plywood, aluminum, fabric and other materials to get the perfect scale look, these guns will make your 1/2 scale WWI model that much easier to build.  Designed to be built in very little time, you can get an extra one built for that one off accessory for your desk at work!



1/2 Scale Spandau Gun Kit
Our Price: $86.57











Balsa USA stepped up to the plate for the extreme giant scale WWI modeler with the release of their 1/2 scale machine guns.  Utilizing balsa, plywood, aluminum, fabric and other materials to get the perfect scale look, these guns will make your 1/2 scale WWI model that much easier to build. Designed to be built in very little time, you can get an extra one built for that one off accessory for your desk at work!



Laker
Our Price: $177.05

Now Available

With the re-release of the Balsa USA Laker you can once again enjoy the memories of flying off water with a low cost fast building sport plane. The Laker is also a great plane for a modeler wanting to try flying from the water for the first time due to it weighing in at 6lbs-7lbs and having a 70”wingspan, giving it a lighter wing loading than some trainers available. Don’t worry if you don’t have a place to fly a floatplane, we supply landing gear in the kit as well so anyone can enjoy the beautiful lines and flight characteristics of the Balsa USA Laker!

Stingray 120
Our Price: $197.95

Fantastic Flight Performance

The Perfect Sport Aerobatic Model
1/4 Scale Sopwith F-1 Camel
Our Price: $329.95

New To The Flightline…Now Available
Mercedes D-III 1/3 Scale Dummy Engine
Our Price: $173.20

1/3 Scale Albatros D5/D5a
Our Price: $1,649.95

Bigger, faster, stronger and more powerful than anything the allies even the Americans have or are likely to ever have! With this new aircraft YOU WILL BE ABLE TO SWEEP YOUR ENEMIES FROM THE SKIES!
1/3 Scale Fokker DR1 Triplane
Our Price: $604.95

Unquestionably the most recognized aircraft of World War I. From late 1917 until June of 1918, the Fokker DR-1 Triplane blazed its way across history and into the popular culture of today.
1/3 Scale Fly Baby Low Wing
Our Price: $768.85

You Asked For It - You Got It! Back By Customer Demand!
Balsa USA welcomes back into our line of exclusive Ultimate Series kits, the Fly Baby Low Wing.

It has been designed to be extremely quick and simple to build. With scale folding wings, the model is very strong and delightfully simple to transport to and from the field. This is a giant scale model that will fit in almost any SUV. Just unfold the wings, attach the flying wires, and go flying.
1/4 Scale Water Rudder Kit
Our Price: $29.98

1/3 Scale Water Rudder Kit
Our Price: $34.60

1/3 Scale Spandau Gun Kit
Our Price: $37.60

Assembled Kit Measures 14-1/4 inches long
1/3 Scale Lewis Gun Kit
Our Price: $37.60

Assembled Kit Measures 13 inches long.
1/4 Scale Spandau Gun Kit
Our Price: $26.98

Assembled Kit Measures 11 inches long.